Tool cleaning
Brushes, mixing vessels, squeegees, rollers and other tools used in resin manufacture or composite production.
Resin & composite cleaning
Resin cleaning starts before the residue hardens.
Cleaning epoxy, polyester, gelcoat or other resin residues is highly dependent on the formulation, cure state, surface and production workflow. If your site relies on solvent cleaning for tools, containers or equipment, we can review the requirements and whether a water-based approach merits testing.
Uncured, partially cured or fully cured? It changes everything.
A fresh residue may respond to a different cleaning method from a partly cured polymer. Once a thermoset has cured, chemical removal can become more difficult, and a more aggressive or mechanical approach may be required. Product selection should start with the material and the cleaning window, not a generic promise to dissolve resin.
Common cleaning challenges worth reviewing.
Manufacturing equipment
Resin residue on surfaces and machinery associated with production or batch changes.
Polymer and coating deposits
Residual coatings or partially cured build-up where removal requirements and compatibility need to be defined.
What matters in resin removal?
The exact resin system, hardener or curing process, time since application, degree of cure, substrate, available cleaning time, mechanical assistance and the degree of cleanliness required can all change the result. Some cleaners may be useful for fresh residue but not for fully cured deposits.
Reviewing an existing resin cleaner?
Whether you use acetone, MEK or a specialist resin cleaning product, a comparison only means something when it tests the same application and relevant operating conditions. We can discuss a trial and set out the criteria that matter before any substitution decision.
FAQ
What removes uncured epoxy resin from tools?
Several types of process may be used, depending on the resin, tools and operating requirements. If your site wants to assess water-based cleaning, share the specific resin system and current method rather than assuming a universal product will work.
Can one formulation remove epoxy, polyester and polyurethane resins?
Not necessarily. These materials differ and may require different approaches. Each resin type and cure condition should be evaluated separately.
Bring us your hardest cleaning question.
Tell us the resin, cure state, surface and current cleaner. We’ll assess whether blent is appropriate for a managed trial.